1.1.1 Cov ntaub ntawv dav dav
Lub TPH400 twj tso kua mis yog siv nyob rau hauv tag nrho cov theem ntawm oilfield ua hauj lwm los twj tso kua mis dej, cement, fracturing kua, thiab lwm yam stimulation kua. Cov plaub hauv qab no yog tshwj xeeb rau TPH400 twj:
- Nws tuaj yeem tso siab rau siab li 20,000 psi (137.6 MPa).
- Nws compact tsim tso cai rau yooj yim ntawm mounting thiab thauj.
- Nws muab kev ua haujlwm siab, kev cia siab, durability thiab lub neej ntev.
- Nws muaj peb qhov dej sib cais- seem kawg uas tuaj yeem hloov tau tus kheej.
1.1.2 Sib dhos Pump
Peb qhov tseem ceeb ntawm lub twj tso kua mis yog
(1) Lub zog kawg,
(2) Cov kua dej kawg,
(3) Lube lub cev
1.1.3 Lub zog kawg
Lub hwj chim- kawg sib dhos txo qhov ceev, sib npaug torque, thiab hloov cov kev ua rotary rau hauv reciprocating nkaus. Nws yuav siv lub zog xa los ntawm lub cav thiab kev sib kis thiab hloov nws mus rau hauv lub zog uas tuaj yeem siv los ntawm cov kua dej kawg.Power kawg yog kho kom haum raws li txoj haujlwm yuav tsum tau ua thiab txuag qhov chaw ntawm lub trailer lossis lub tsheb thauj khoom. Cov ntaub ntawv muaj nyob rau hauv txoj cai- thiab sab laug- txhais tes versions. Nquag, cov khoom siv cementing siv Holroyd iav teeb (8.6: 1) rau TPH400 twj tso kua mis thiab cov khoom siv tawg siv Cone tsav (8.4: 1) lub zog. Lwm yam customizing nta muaj xws li cov hauv qab no:
- Lub systems
- Tus khub flanges
- Worm- thiab nplhaib- gear ratios
- Kub exchanger tsim
|
TSI 400 Pump Specifications thiab Cov ntaub ntawv |
|
|
Rooj 1.2-Lub zog Xaus |
|
|
Tus khub Flange |
Xyoo 1800 Series Spicer |
|
Tswv yim Spline |
3-hauv.- 10 (7.62 hli) |
|
Tswv yim Kev sib hloov |
clockwise |
|
Plunger Mob stroke |
8 nti (203.2mm) |
|
Tswv yim Ceev w18.4:1 los yog 8.6:1 ua |
2,400 (siab tshaj rev / mm) |
|
Qhov siab tshaj plaws Tswv yim Torque |
7,215 lbf (9,782.227 Nm) |
|
Qhov siab tshaj plaws Tswv yim Lub zog nees |
600hp (447kw) --- 8.6:1 |
|
iav Tsheb ciav hlau |
Hlau worm thiab bronze nplhaib w / 8.4: 1 lossis 8.6: 1 piv (tus qauv) |
|
Crankshaft |
Forged hlau, plaub lub ntsiab bearings |
|
Kev sib txuas Qws |
Peb, forged aluminium, cais lub hau, thiab ntxig bearings |
|
Crossheads |
Peb, cam khwb cia hlau |
|
Case |
Siab -lub zog steel vuam |
|
Cov kabmob Hom |
Roller thiab haiv neeg |
|
Roj Qhov system |
Iav twj tso kua mis tsav tawm worm (std) los yog tej thaj chaw deb |
|
Roj Lim |
Hloov cov ntsiab lus thiab sib nqus strainer (Schroeder) |
|
Roj Muaj peev xwm |
22 US gal (83L) |
|
Roj Siab |
80 ~ 100 psi (0.552 txog 0.689 MPa) |
|
Yam tsawg kawg nkaus Roj Ntws |
36GPM (136M3PM) |
|
Qhov hnyav |
3, 864 lb (1,752 kg) |
, P
| TPH400 Pump Fais Fab-Qhov kawg | ||
| Companion Flange Subassebly | ||
| Ib feem | Qty | Kev piav qhia |
| P40-14-600 | COMPANION Flange SUBASSEBLY | |
| P40-14-501 | 1 | FLANGE, COMPANION, 6 1/6", 1-951 SPICER |
| P40-14-502 | 1 | WASHER, WORM YOKE RETAINER |
| P40-14-503 | 1 | WASHER, LOCK, WORM YOKE RETAINER |
| X20-08-509 | 2 | HHCS,.375-16UNCX1 1/4"LONG |
| Worm Gear Drive-End Assembly | ||
| Ib feem | Qty | Kev piav qhia |
| P40-14-300 | KHAWV KOOB 8.6:1 (HOLROYD) SUBASSEMBLY | |
| P40-14-101 | 4 | SCREW, SOCKET HEAD CAP, 3/8"-16NCX1 1/4" |
| V06-68-473 | 4 | WASHER, FLAT, 3/8 "SAE, STEEL |
| P40-14-103 | 1 | COVER, OIL SEAL RETAINER |
| P40-14-104 | 1 | TSEV, OIL, 53-IN. X 7448, FL, 4"BX5 1/2"ODX1/2"WIDE |
| P40-14-106 | 2 | GASKET, WORM HUSING Input END |
| P40-14-107 | 1 | RETAINER, BEARING, WARM-DRIVE END |
| P40-14-105 | 1 | BEARING, DRIVE END-WORM PHEEJ |
| P40-14-311 | 1 | GEAR, WORM, SUB-ASSY, 8.6:1 , POWER-END ASSY |
| P40-14-116 | 1 | BEARING, THRUST-END, POV THAWJ |
| P40-14-118 | 1 | BUSHING, WORM THRUST BEARING |
| P40-14-109 | 1 | TSEEM CEEB, POOB-THRUST BEARING SPACER |
| P40-14-122 | 1 | BEARING, THRUST, STACK worm |
| P40-14-117 | 1 | TSEEM CEEB, POOB-THRUST BEARING |
| P40-14-120 | 1 | QHOV TSEEB, LOCK, SPLIT-WORM THRUST kawg, sab xis tes |
| P40-14-121 | 1 | SCREW, SOCKET HEAD CAP, #10-32NFX1/2", |
| P40-14-310 | 1 | ADAPTER-KUB. SHARP LUBRICATOR PUMP |
| 000P569267 | 1 | O-RING, NITRILE 90 DURO #267, PEROXIDE CURED |
| P40-14-115 | 1 | RETAINER, Iron worm-THRUST END BEARING |
| P40-14-124 | 3 | SHIM, CLEARANCE, POV THAWJ BEARING, 0.005 " |
| P40-14-125 | 3 | SHIM, CLEARANCE, POV THAWJ BEARING, 0.010 " |
| P40-14-126 | 3 | SHIM, CLEARANCE, POV THAWJ BEARING, 0.020 " |
| 000P569264 | 1 | O-RING, NITRILE 90 DURO #264, PEROXIDE CURED |
| P40-05-700 | 1 | PUMP, ASSY, OIL, 100GPM, TUTHILL |
| P40-14-219 | 8 | SAIB, CAP, WORM HUSING, RIGHT-HAND |
| P40-14-316 | 4 | STUD-LG LOC INSERT-TUTHILL OIL PUMP MTG |
| V06-45-482 | 4 | NTAU, HEAVY HEX, 1/2-13 |
| Lub nplhaib iav Subassembly | ||
| Ib feem | Qty | Kev piav qhia |
| P40-14-200 | GEAR, Nplhaib, SUB-ASSY, POWER-END ASSY (Xaiv tes) | |
| P40-14-204 | 1 | WIRE, STOVE PIPE, 19 GA, 72 "LONG |
| P40-14-241 | 6 | SCREW, CAP, SPLINE DRIVE-FLANGE |
| P40-14-205 | 1 | SPIDER, CRANKSHAFT THRUST RETAINER |
| P40-14-211 | 3 | WIRE, STOVE PIPE, 19 GA., 190 "LONG |
| P40-14-213 | 24 | WASHER, LEFT-HAND GEAR BEARING CLAMP |
| P40-14-212 | 48 | Screw, CAP, Nplhaib, Mounting, Gear Clamp |
| P40-14-214 | 2 | ROD, Vuam, L-61,1/8", 95" LONG |
| P40-14-215 | 2 | Tus neeg tiv tauj, TSIS MUAJ. 8,128-B RELIANCE |
| P40-14-216 | 1 | FLANGE, GEAR SPLINE DRIVE |
| P40-14-218 | 1 | WIRE, STOVE PIPE, 19 GA, 190 "LONG |
| P40-14-220 | 1 | Nplhaib, THRUST, GEAR BEARING |
| P40-14-219 | 16 | SAIB, CAP, WORM HUSING, RIGHT-HAND |
| P40-14-222 | 3 | SHIM, CLEARANCE, GEAR SUPPORT BEARING, 0.005 " |
| P40-14-223 | 3 | SHIM, CLEARANCE, GEAR SUPPORT BEARING, 0.010 " |
| P40-14-224 | 3 | SHIM, CLEARANCE, GEAR SUPPORT BEARING, 0.020 " |
| P40-14-201 | 1 | ADAPTER, CLAMP, RIGHT-HAND GEAR SPLINE DRIVE |
| P40-14-428 | 1 | GEAR, RING, SUB-ASSY, 8.6:1 , POWER-END ASSY |
| P40-14-225 | 1 | BEARING, GEAR SUPPORT |
| P40-14-229 | 24 | LUG, GEARING CLAMP, sab xis-HAND |
| P40-14-234 | 1 | Txhawb nqa, BEARING, RING GEAR |
| P40-14-232 | 16 | SCREW, SOCKET HEAD CAP, 1/2"-13NCX1 1/4" |
| P15-36-014 | 16 | WASHER, LOCK, 1/2 "INT SHAKEPROOF |
| P40-14-236 | 3 | SHIM, POSITIONING, GEAR Side, 0.005 " |
| P40-14-237 | 3 | SHIM, POSITIONING, GEAR Side, 0.010 " |
| P40-14-238 | 3 | SHIM, POSITIONING, GEAR Side, 0.020 " |
| P40-14-202 | 1 | PIN, COTTER, 1/8"X{2}}/2", SPRING STEEL |
| P40-14-203 | 1 | NUT, HEX SLOT, 1"-14NF, PL |
| P40-14-206 | 1 | BUSHING, Kab laug sab SPACER |
| P40-14-207 | 3 | SHIM, POSITIONING, CRANKSHAFT AXIAL, 0.020 " |
| P40-14-208 | 3 | SHIM, POSITIONING, CRANKSHAFT AXIAL, 0.040 " |
| P40-14-209 | 3 | SHIM, POSITIONING, CRANKSHAFT AXIAL, 0.060 " |
| P40-14-210 | 1 | COUPPLING, CRANKSHAFT, SPLINE DRIVE |
| P40- 14-240 | 1 | STUD, FLANGED, CRANKSHFT thrust |
| P40-14-242 | 1 | WIRE, STOVE PIPE, 19 GA, 24 "LONG |
| V06-50-322 | 4 | WASHER, Caij Nplooj Ntoos Hlav, Hlau, 1/2 "ID |
| Ib feem | Qty | Kev piav qhia |
| P41-14-400 | RING GEAR (HOLROYD) SUBASSEMBLY (sab laug tes) | |
| P40-14-204 | 1 | WIRE, STOVE PIPE, 19 GA, 72 "LONG |
| P40-14-241 | 6 | SCREW, CAP, SPLINE DRIVE-FLANGE |
| P40-14-205 | 1 | SPIDER, CRANKSHAFT THRUST RETAINER |
| P40-14-211 | 3 | WIRE, STOVE PIPE, 19 GA., 190 "LONG |
| P40-14-213 | 24 | WASHER, LEFT-HAND GEAR BEARING CLAMP |
| P40-14-212 | 24 | Screw, CAP, Nplhaib, Mounting, Gear Clamp |
| P40-14-214 | 2 | ROD, Vuam, L-61,1/8", 95" LONG |
| P40-14-215 | 2 | Tus neeg tiv tauj, TSIS MUAJ. 8,128-B RELIANCE |
| P40-14-216 | 1 | FLANGE, GEAR SPLINE DRIVE |
| P40-14-218 | 1 | WIRE, STOVE PIPE, 19 GA, 190 "LONG |
| P40-14-220 | 1 | Nplhaib, THRUST, GEAR BEARING |
| P40-14-219 | 16 | SAIB, CAP, WORM HUSING, RIGHT-HAND |
| P40-14-222 | 3 | SHIM, CLEARANCE, GEAR SUPPORT BEARING, 0.005 " |
| P40-14-223 | 3 | SHIM, CLEARANCE, GEAR SUPPORT BEARING, 0.010 " |
| P40-14-224 | 3 | SHIM, CLEARANCE, GEAR SUPPORT BEARING, 0.020 " |
| P40-14-428 | 1 | GEAR, RING, SUB-ASSY, 8.6:1, POWER-END ASSY |
| P41-14-225 | 1 | BEARING, GEAR SUPPORT |
| P40-14-234 | 1 | Txhawb nqa, BEARING, RING GEAR |
| P40-14-232 | 16 | SCREW, SOCKET HEAD CAP, 1/2"-13NCX1 1/4" |
| P15-36-014 | 16 | WASHER, LOCK, 1/2 "INT SHAKEPROOF |
| P40-14-236 | 3 | SHIM, POSITIONING, GEAR Side, 0.005 " |
| P40-14-237 | 3 | SHIM, POSITIONING, GEAR Side, 0.010 " |
| P40-14-238 | 3 | SHIM, POSITIONING, GEAR Side, 0.020 " |
| P40-14-202 | 1 | PIN, COTTER, 1/8"X1 1/2", SPRING STEEL |
| P40-14-203 | 1 | NUT, HEX SLOT, 1"-14NF, PL |
| P40-14-206 | 1 | BUSHING, Kab laug sab SPACER |
| P40-14-207 | 3 | SHIM, POSITIONING, CRANKSHAFT AXIAL, 0.020 " |
| P40-14-208 | 3 | SHIM, POSITIONING, CRANKSHAFT AXIAL, 0.040 " |
| P40-14-209 | 3 | SHIM, POSITIONING, CRANKSHAFT AXIAL, 0.060 " |
| P40-14-210 | 1 | COUPPLING, CRANKSHAFT, SPLINE DRIVE |
| P40- 14-240 | 1 | STUD, FLANGED, CRANKSHFT thrust |
| P40-14-242 | 1 | WIRE, STOVE PIPE, 19 GA, 24 "LONG |
| V06-50-322 | 4 | WASHER, Caij Nplooj Ntoos Hlav, Hlau, 1/2 "ID |
| Crankshaft Main Bearing Subassembly | ||
| Ib feem | Qty | Kev piav qhia |
| P40-12-000 | CRANKSHFT SUBASSEMBLY, POWER-XAIV ASSEMBLY | |
| P40-12-004 | 5 | KHOOM, SEAL RETAINER, CRANKSHFT ROD |
| P40-12-006 | 3 | SCREW, CAP, SEAL RETAINER |
| 000P569338 | 5 | O-RING, NITRILE 90 DURO #338, PEROXIDE CURED |
| P40-12-003 | 6 | WASHER, STAT-O-SEAL, 1/4"7100-1/4" |
| P40-12-002 | 6 | WASHER, FLAT, 3/16", WI-PL |
| P40-12-001 | 3 | NUT, ELASTIC STOP, 1/4-28NF-LT,21NE-48 |
| P40-12-007 | 1 | PLUG, CRANKSHFT ROD JOURNAL |
| P40-12-008 | 1 | CRANKSHFT ASSEMBLY |
| X20-05-052 | 4 | SHCS, 0.312-18 UNC X 1.00" |
| V06-50-225 | 4 | WASHER, Caij nplooj ntoos hlav LOCK STEEL MEDIUM 5/16 "BOLT |
| P40-12-022 | 4 | WASHER, OUTER RACE |
| P15-01-012 | 4 | NUT, ELASTIC STOP, 5/16" 18NC |
| P40-12-015 | 8 | WASHER, Sab Nrauv Sib Tw, CRANKSHFT, MAIN BEARING |
| X20-08-739 | 4 | HHCS, 5/16"-18 X 3-3/4", PLAIN Tiav, SAE J429 Qib 8 |
| P40-12-016 | 3 | SHCS, 1/2"-13NCX3", THREAD, W/HOLES |
| P40-12-009 | 6 | WASHER, RETAINER, Sab Hauv Kev Sib Tw, Hnyav -Lub luag haujlwm tseem ceeb BEARING |
| P40-12-010 | 12 | NUT, TUS NEEG -LOCKING, 1/2"-13NC, PL |
| X20-08-595 | 6 | HHCS,.500-13UNCX3 1/2"LONG, SAE Qib 5 |
| P40-12-012 | 15 | WASHER, BEARIGN RETAINER, FORGED |
| P40-12-013 | 3 | SCREW, HEX HEAD , 1/2"-13NCX2 3/4", PL |
| P40-12-021 | 1 | RING, RETAINER, RIGHT-HAND |
| P40-12-014 | 2 | BEARING, MAIN OUTBOARD |
| P40-12-019 | 2 | BEARING, MAIN INBOARD |
| Crosshead thiab Txuas Qws Subassembly | ||
| Ib feem | Qty | Kev piav qhia |
| P40-13-000 | QHOV CHAW UA HAUJ LWM SUBASSEMBLY, POWER-END ASSEMBLY |
|
| P40-13-011 | 3 | SLIDE, TIP CROSSHEAD |
| P40-13-021 | 3 | SHIM, CROSSHEAD SLIDE, 0.002 " |
| P40-13-022 | 3 | SHIM, CROSSHEAD SLIDE, 0.005 " |
| P40-13-023 | 3 | SHIM, CROSSHEAD SLIDE, 0.010 " |
| P40-13-024 | 4 | QHOV CHAW, TXOJ CAI-HAND CROSSHEAD Slide Clamp |
| P40-13-001 | 1 | WIRE, STOVE PIPE, 19 GA, 144 "LONG |
| P40-13-025 | 4 | SCREW, CROSSHEAD Slide Clamp |
| P40-13-026 | 4 | KOOB, LIFT-HAND CROSSHEAD Slide Clamp |
| P40-13-020 | 3 | SLIDE-BOTTOM, CROSSHEAD |
| P40-13-029 | 4 | CLAMP, OUTBOARD, CROSSHEAD SLIDE |
| P40-13-028 | 8 | SCREW, SOCKET SET, 1/4-20X1/4", CUP POINT |
| P40-13-027 | 8 | SCREW, 1/4"-20NCX1", CUP PT, HEX SOCKET, PL |
| P40-13-002 | 3 | Kev sib txuas-ROD SUBASSEMBLY, POWER-END ASSEMBLY |
| P40-13-037 | 3 | BEARING, CONNECTING-ROD, TPH400 |
| P40-13-003 | 3 | DOWEL, CONNECTING-ROD CAP |
| P40-13-008 | 6 | KEY, CROSSHEAD PIN |
| P40-13-006 | 3 | SCREW, CAP, RETAINING, CROSSHEAD PIN |
| P40-13-010 | 3 | NUT, ELASTIC STOP, 5/16 "-24NF, LT, 21NE-054 |
| P40-13-007 | 6 | WASHER, DISHED |
| P15-13-013 | 18 | SCREW, SOCKET FLAT HEAD, 1/4-20NCX 5/8 " |
| P40-13-019 | 3 | QHOV CHAW, CROSSHEAD |
| P40-13-030 | 3 | SHIM, Pem Hauv Ntej CROSSHEAD, 0.005 " |
| P40-13-031 | 3 | SHIM, Pem Hauv Ntej CROSSHEAD, 0.010 " |
| P40-13-018 | 3 | CROSSHEAD, MACHINED |
| P40-13-009 | 3 | PIN, CROSSHEAD |
| P40-13-014 | 3 | SHIM, CROSSHEAD SHOE, TOP, 0.003 " |
| P40-13-015 | 3 | SHIM, CROSSHEAD SHOE, TOP, 0.005 " |
| P40-13-016 | 3 | SHIM, CROSSHEAD SHOE, TOP, 0.010 " |
| P40-13-017 | 3 | SHIM, CROSSHEAD SHOE, TOP, 0.020 " |
| P40-13-013 | 3 | SHOE TOP, CROSSHEAD |
| Suction Hose Subassembly, Fais fab -End | ||
| Ib feem | Qty | Kev piav qhia |
| P40-05-100 | Suction Hose Subassembly | |
| V06-37-882 | 1 | PLUG, PIPE, 1-1 / 2 "STD SQ, MALLEABLE STEEL |
| P40-05-105 | 4 | WASHER, SEALING, 1/4", CARB STEEL, PLated |
| X20-27-250 | 4 | WASHER, FLAT, 1/4 "SAE |
| X20-08-573 | 4 | HHCS,.250-20UNCX0.750" |
| P40-05-108 | 1 | GASKET, ELL FLANGED HEAT EXCHANGER |
| P40-05-109 | 1 | Lub luj tshib, Flange rau hose, W / DRAIN, Roj SYSTEM |
| X04-00-753 | 2 | CONSTANT-TORQUR WORM-DRIVE CLAMPS |
| X26-01-409 | 0.56 | HOSE SIZE: 421-32 N0-SKIVE |
| X26-22-124 | 1 | ADAPTER, SWAGED STANDARD FITTINGS, 2 "NPE, CS |
| X26-02-092 | 1 | ELBOW, Z2"-Z2" |
| X26-02-560 | 1 | PLUG, 2" NPT |
| Schroeder Filter / Strainer Lubrication Subassembly | ||
| Ib feem | Qty | Kev piav qhia |
| P40-05-000 | POWER-END ASSEMBLY LUBE SYSTEM SUBASSEMBLY, POV-HAND |
|
| X20-08-576 | 10 | HHCS, 5/16"-18UN 1"LONG SAE Qib 5" |
| X20-28-509 | 12 | WASHER, LOCK, 5/16 " |
| P15-12-031 | 1 | NUT, 63121 THREAD PROTECTOR, 7/8 "-18UNS W |
| P15-11-031 | 1 | GASKET, DRIVE ADAPTER, CAP, GALLON COUNTER |
| P15-10-031 | 1 | INJUCTOR, Roj, CRANKSHAFT, W / # 20 hose ADAPTER |
| P15-09-031 | 1 | GASKET, INJUCTOR, CRANKSHAFT, Roj |
| P15-08-031 | 1 | Nplhaib, NTAUB NTAWV |
| 000N567126 | 1 | O-RING, NITRILE 70 DURO |
| P15-05-031 | 1 | SEAL, MAGNETIC, SHAFT, MSC, 65152 REV B |
| 000N567120 | 1 | O-RING, NITRILE 70 DURO |
| P15-04-031 | 1 | RING, SEAL |
| P15-03-031 | 1 | BUSHING, MAGNETIC, SEAL INSULATOR & COUNTERDRIVE |
| P40-05-216 | 1 | MANIFOLD, Roj STRAINER THIAB FILTER, MACHINED |
| X20-08-505 | 8 | HHCS,.500-13UNCX1", Qib 8, ZINC PLated |
| V06-50-322 | 8 | WASHER, Caij Nplooj Ntoos Hlav, Hlau, 1/2 "ID" |
| X20-08-681 | 2 | HHCS,.312-18UNCX1.5"LONG" |
| 000P569234 | 2 | O-RING, NITRILE 90 DURO |
| P40-05-206 | 1 | MANIFOLD, Roj STRAINER THIAB FILTER, MACHINED |
| 000P569225 | 2 | O-RING, NITRILE 90 DURO |
| P40-05-430 | 1 | FILTER, OIL, ELEMENT, W/MAGNETIC SUCTION SEPARATOR SKB 1 1/2 |
| P40-05-255 | 1 | ADAPTER, HOSE,,,90, 1 1/2", SPLIT Flange |
| X26-02-924 | 2 | FLANGE, SAE CODE 61,1-1/2", UN 1/2"-13X1-1/2" |
| P06-00-370 | 1 | TUBE, roj kab, POV- tes, W/HOSE |
| P40-05-032 | 3 | BOLT, SADDLE, CROSSHEAD OILER |
| P40-05-033 | 6 | WASHER, SEAL 1/2 " |
| P40-05-034 | 6 | SADDLE, OIL LINE, CROSSHEAD OILER |
| 000P569118 | 6 | O-RING, NITRILE 90 DURO |
| X26-11-086 | 1 | HOSE ASSY MODEL: 421 06 06 06 06 06 500 |
| X26-02-804 | 1 | ADAPTER, Ncaj nraim, 3/8" NPT MALE X 9/16-18 JIC MALE |
| X26-02-721 | 1 | ELBOW, 1/4" NPTM X 7/16"-20 JIC37 MALE, STEEL |
| P60-05-007 | 1 | HOSE ASSY - 10.00" LG W/1/4" SEA 37 DEG SWVL ENDS |
| X26-02-722 | 1 | ADAPTER, 1/8" NPTM X 7/16-20 JIC37 MALE |
| P40-05-420 | 1 | FILTER, OIL, ELEMENT, 25M |
| P40-05-049 | 1 | CLAMP, EXHAUST, 4 1/2", STEMCO |
| P40-05-048 | 1 | BRAKET, SCHROEDER, FILTER |
| X00-01-571 | 2 | NUT, 3/8"-16UN-3B |
| Ib feem | Qty | Kev piav qhia |
| P40-05-001 | POWER-END ASSEMBLY LUBE SYSTEM SUBASSEMBLY, RIGHT-HAND |
|
| X20-08-576 | 10 | HHCS, 5/16"-18UN 1" LONG |
| X20-28-509 | 12 | WASHER, LOCK, 5/16 " |
| P15-12-031 | 1 | NUT, 63121 THREAD PROTECTOR, 7/8 "-18UNS W |
| P15-11-031 | 1 | GASKET, DRIVE ADAPTER, CAP, GALLON COUNTER |
| P40-05-255 | 1 | ADAPTER, HOSE,,,90,1 1/2", SPLIT Flange |
| P15-10-031 | 1 | INJUCTOR, Roj, CRANKSHAFT, W / # 20 hose ADAPTER |
| P15-09-031 | 1 | GASKET, INJUCTOR, CRANKSHAFT, Roj W / # 20 ADAPTER |
| P15-08-031 | 1 | Nplhaib, NTAUB NTAWV |
| 000N567126 | 1 | O-RING, NITRILE 70 DURO |
| P15-05-031 | 1 | SEAL, MAGNETIC, SHAFT, MSC, 65152 REV B |
| 000N567120 | 1 | O-RING, NITRILE 70 DURO |
| P15-04-031 | 1 | RING, SEAL |
| P15-03-031 | 1 | BUSHING, MAGNETIC, SEAL INSULATOR & COUNTER DRIVE |
| P40-05-216 | 1 | Lub cev, ASSY, VALVE, BYPASS, SCHROEDER OIL SYSTEM |
| X20-08-505 | 8 | HHCS,.500-13UNCX1" |
| V06-50-322 | 8 | WASHER, Caij Nplooj Ntoos Hlav, Hlau, 1/2 "ID |
| X20-08-681 | 2 | HHCS,.312-18UNCX1.5"LONG |
| 000P569234 | 2 | O-RING, NITRILE 90 |
| P40-05-206 | 1 | MANIFOLD, Roj STRAINER THIAB FILTER, MACHINED |
| 000P569225 | 2 | O-RING, NITRILE 90 DURO |
| P40-05-430 | 1 | FILTER, Roj, Element, W / MAGNETIC SUCTION SEPARATOR SKB 1 1/2 |
| X26-02-924 | 2 | FLANGE, SAE CODE 61,1-1/2", UN 1/2"-13X1-1/2" CS BOLT |
| P06-00-380 | 1 | TUBE, roj kab, sab xis- tes, W/STEEL HOSE |
| P40-05-032 | 3 | BOLT, SADDLE, CROSSHEAD OILER |
| P40-05-033 | 6 | WASHER, SEAL 1/2 " |
| P40-05-034 | 6 | SADDLE, OIL LINE, CROSSHEAD OILER |
| 000P569118 | 6 | O-RING, NITRILE 90 DURO |
| X26-11-086 | 1 | HOSE ASSY MODEL:421 06 06 06 06 06 500 |
| X26-02-804 | 1 | ADAPTER, CS, 3/8" NPT MALE X 9/16" JIC MALE |
| X26-02-721 | 1 | ELBOW, 1/4" NPTM X 7/16"-20 JIC37 MALE, STEEL |
| P60-05-007 | 1 | HOSE ASSY - 10.00" LG W/1/4" SEA 37 DEG SWVL ENDS |
| X26-02-722 | 1 | ADAPTER, CS, 1/8" NPT MALE X 7/16" JIC MALE |
| P40-05-420 | 1 | FILTER, OIL, ELEMENT, 25M |
| P40-05-049 | 1 | CLAMP, EXHAUST, 4 1/2", STEMCO |
| P40-05-048 | 1 | BRAKET, SCHROEDER, FILTER |
| X00-01-571 | 2 | NUT, 3/8"-16UN-3B |
| Bypass Schroeder Roj System | ||
| Ib feem | Qty | Kev piav qhia |
| P40-05-216 | Lub cev, ASSY, VALVE, BYPASS, SCHROEDER OIL SYSTEM | |
| P40-05-201 | 1 | Lub cev, VALVE, BYPASS, SCHROEDER OIL SYSTEM |
| P40-05-211 | 1 | Caij nplooj ntoos hlav, BYPASS, roj siab 80 ~ 100PSI |
| P40-05-213 | 1 | SCREW, ADJUST, BYPASS, SCHROEDER OIL SYSTEM |
| P40-05-214 | 1 | CAP, BY-PASS, SCHROEDER OIL SYSTEM |
| P40-05-215 | 1 | GASKET, CAP, SCREW, BYPASS, SCHROEDER OIL SYSTEMS |
| P40-05-212 | 1 | POB, STEEL, 2", CHROME STEEL, |
| Crankshaft Lubricator Subassembly | ||
| Ib feem | Qty | Kev piav qhia |
| X20-28-509 | 4 | WASHER, LOCK, 5/16 " |
| X20-08-576 | 4 | HHCS, 5/16"-18UN 1" LONG SAE Qib 5 |
| P15-12-031 | 1 | NUT,63121 THREAD PROTECTOR, 7/8"- 18 NWS W |
| P15-11-031 | 1 | GASKET, DRIVE ADAPTER, CAP, GALLON COUNTER |
| P15-10-031 | 1 | INJUCTOR, Roj, CRANKSHAFT, W/#20 HOSE ADAPTER |
| P15-08-031 | 1 | Nplhaib, NTAUB NTAWV |
| P15-09-031 | 1 | GASKET, INJUCTOR, CRANKSHAFT, Roj W/#20 ADAPTER |
| P15-04-031 | 1 | RING, SEAL |
| P15-03-031 | 1 | BUSHING, MAGNETIC, SEAL INSULATOR & COUNTER DRIVE |
| P15-05-031 | 1 | SEAL, MAGNETIC, POB, MSC, |
| 000P569120 | 1 | O-RING, NITRILE 90 DURO |
| 000P569126 | 1 | O-RING, NITRILE 90 DURO |
| Case Cover Subassembly | ||
| Ib feem | Qty | Kev piav qhia |
| P40-11-600 | CAS SUBASSEMBLY, POWER END ASSY, RH DRIVE |
|
| P60-14-006 | 2 | PLUG, SOCKET PIPE, 1/8" NPT |
| X26-22-026 | 1 | PLUG, PIPING, 1" NPT, SQUARE HEAD |
| X20-08-571 | 48 | HHCS, 5/16"-18UN 3/4" LONG |
| X20-28-509 | 16 | WASHER, LOCK, 5/16 " |
| P40-11-016 | 1 | Plate, Npog, OIL INJECTOR |
| P40-11-017 | 1 | GASKET, OIL INJECTOR, Npog PLATE |
| X20-08-502 | 58 | HHCS, 5/16"-18UN 3/4" LONG |
| P40-11-008 | 57 | WASHER, FLAT, 5/16", WI, PL |
| P40-11-020 | 35 | WASHER, SEAL, 5/16", BARWOOD |
| P40-11-028 | 1 | COVER, LONG, CROSSHEAD SLIDE |
| P40-11-019 | 1 | GASKET, COVER, LONG, CROSSHEAD SLIDE |
| P40-11-042 | 1 | POWER-END, CAS, MACHINED, RIGHT-HAND DRIVE |
| P40-11-002 | 3 | GASKET, CONNECTING QAB nkag COVER |
| P40-11-001 | 2 | COVER, CONNECTING ROD ACCESS |
| P40-11-006 | 1 | COVER ASSEMBLY |
| P40-11-005 | 1 | DIPSTICK, OIL, 4 1/4" OD FILER Neck |
| P40-11-034 | 1 | COVER, INSPECTION, GEAR |
| P40-11-033 | 1 | GASKET, COVER, INSPECTION, GEAR |
| X26-02-028 | 2 | PLUG, 1/2" NPT (4N-08) |
| P40-11-029 | 1 | BAFFLE, INSIDE, GEAR HUSING |
| P40-11-032 | 1 | GASKET, Npog, INSPECTION GEAR |
| P40-11-035 | 1 | COVER, PLATE, GEAR HOUSING |
| X20-08-576 | 4 | HHCS, 5/16"-18UN 1" LONG |
| P40-11-025 | 1 | COVER, SHORT, CROSSHEAD SLIDE |
| P40-11-026 | 1 | PLUG, PIPING, 1" NPT, SQUARE HEAD |
| Ib feem | Qty | Kev piav qhia |
| P40-11-000 | CAS SUBASSEMBLY, POWER END ASSY, LH DRIVE |
|
| P60-14-006 | 2 | PLUG, SOCKET PIPE, 1/8" NPT |
| X26-22-026 | 1 | PLUG, PIPING, 1" NPT, SQUARE HEAD |
| X20-08-571 | 48 | HHCS, 5/16"-18UN 3/4" LONG , |
| X20-28-509 | 16 | WASHER, LOCK, 5/16 " |
| P40-11-016 | 1 | Plate, Npog, OIL INJECTOR |
| P40-11-017 | 1 | GASKET, OIL INJECTOR, Npog Plate |
| X20-08-502 | 58 | HHCS, 5/16"-18UNX1/2" LONG |
| P40-11-008 | 57 | WASHER, FLAT, 5/16", WI, PL |
| P40-11-020 | 35 | WASHER, SEAL, 5/16", BARWOOD |
| P40-11-028 | 1 | COVER, LONG, CROSSHEAD SLIDE |
| P40-11-019 | 1 | GASKET, COVER, LONG, CROSSHEAD SLIDE |
| P40-11-024 | 1 | CAS, MACHINED, LEFT-HAND DRIVE |
| P40-11-002 | 3 | GASKET, CONNECTING QAB nkag COVER |
| P40-11-001 | 2 | COVER, CONNECTING ROD ACCESS |
| P40-11-006 | 1 | COVER ASSEMBLY |
| P40-11-005 | 1 | DIPSTICK, OIL, 4 1/4" OD FILER Neck |
| P40-11-034 | 1 | COVER, INSPECTION, GEAR |
| P40-11-033 | 1 | GASKET, COVER, INSPECTION, GEAR |
| X26-02-028 | 2 | PLUG, 1/2" NPT (4N-08) |
| P40-11-029 | 1 | BAFFLE, INSIDE, GEAR HUSING |
| P40-11-032 | 1 | GASKET, Npog, INSPECTION GEAR |
| P40-11-036 | 1 | COVER, PLATE, GEAR HOUSING |
| X20-08-576 | 4 | HHCS, 5/16"-18UN 1"LONG, |
| P40-11-025 | 1 | COVER, SHORT, CROSSHEAD SLIDE |
| P40-11-026 | 1 | GASKET, CROSSHEAD SLIDE, SHORT COVER |
| Spacer Subassembly | ||
| Ib feem | Qty | Kev piav qhia |
| P40-15-120 | L-4 SPACER ASSEMBLY, nrog rau hlau PLATES THIAB TUB, 3 3/8" |
|
| P40-15-117 | 12 | STUD, ATTACHING, FE rau PE L-4 THIAB L-3 SPACER |
| P40-15-105 | 3 | TIE ROD, PUSH ROD, L-SPACER |
| P40-15-118 | 1 | PLATE, Hwj chim kawg, L-4 SPACER |
| X20-08-576 | 6 | HHCS, 5/16"-18UN 1" LONG |
| X20-28-509 | 6 | WASHER, LOCK, 5/16 " |
| P40-15-108 | 12 | TUBE, FRAME, L-4 SPACER |
| P40-15-104 | 3 | PUSH ROD, ob-PIECE, L-SPACER |
| 000P569223 | 3 | O-RING, NITRILE 90 DURO |
| P40-15-102 | 3 | RETAINER, PUSH ROD, OB -PIECE NOSE |
| P40-40-614 | 12 | NUG, 1"-14 NF |
| P40-15-143 | 3 | ADAPTER-PUSH ROD-Ob PIECC |
| X20-08-048 | 9 | HHCS,.312-18UNCX0.750" |
| P40-11-008 | 9 | WASHER, FLAT, 5/16", WI, PL |
| 000P569158 | 3 | O-RING, NITRILE 90 DURO |
| P40-15-113 | 3 | GLAND, WIPER, T / URETHANE, L-4 thiab L-3 SPACER |
| P40-15-132 | 3 | SEAL ASSEMBLY, rau Push ROD 3.375" |
| P40-15-109 | 3 | RING, RETAINING, 437 INT,.4378-SPEC |
| P40-15-132 | 3 | SEAL ASSEMBLY, rau Push ROD 3.375" |
| P40-15-107 | 3 | GLAND, WIPER, T / URETHANE, L-4 thiab L-3 SPACER |
| Ib feem | Qty | Kev piav qhia |
| P40-15- 100 | L-4 SPACER ASSEMBLY, nrog rau hlau Plates thiab Tubes, 4 " |
|
| P40-15-117 | 12 | STUD, ATTACHING, FE rau PE L-4 THIAB L-3 SPACER |
| P40-15-105 | 3 | TIE ROD, PUSH ROD, L-SPACER |
| P40-15-118 | 1 | PLATE, Hwj chim kawg, L-4 SPACER |
| X20-08-576 | 6 | HHCS, 5/16"-18UN 1" LONG |
| X20-28-509 | 6 | WASHER, LOCK, 5/16 " |
| P40-15-108 | 12 | TUBE, FRAME, L-4 SPACER |
| P40-15-104 | 3 | PUSH ROD, ob-PIECE, L-SPACER, |
| 000P569223 | 3 | O-RING, NITRILE 90 DURO |
| P40-15-102 | 3 | RETAINER, PUSH ROD, OB -PIECE NOSE |
| P40-40-614 | 12 | NUG, 1"-14 NF |
| P40-15- 140 | 3 | ADAPTER-PUSH ROD-Ob PIECC NOSE 4" |
| X20-08-048 | 9 | HHCS,.312-18UNCX0.750" |
| P40-11-008 | 9 | WASHER, FLAT, 5/16", WI, PL |
| 000P569158 | 3 | O-RING, NITRILE 90 DURO |
| P40-15-113 | 3 | GLAND, WIPER, T / URETHANE, L-4 Thiab L-3 SPACER |
| P40-15-132 | 3 | SEAL ASSEMBLY, rau Push ROD 3.375" |
| P40-15-109 | 3 | Ntiv nplhaib, RETAINING, 437 INT,.4378- SPEC |
| P40-15- 132 | 3 | SEAL ASSEMBLY, rau Push ROD 3.375" |
| P40-15-107 | 3 | GLAND, WIPER, T / URETHANE, L-4 Thiab L-3 SPACER |
| Ib feem | Qty | Kev piav qhia |
| P40-15- 101 | L-4 SPACER ASSEMBLY, nrog Hlau Phaj thiab Tubes, 4.5 " |
|
| P40-15-117 | 12 | STUD, ATTACHING, FE rau PE L-4 Thiab L-3 SPACER |
| P40-15-105 | 3 | TIE ROD, PUSH ROD, L-SPACER |
| P40-15-118 | 1 | PLATE, Hwj chim kawg, L-4 SPACER |
| X20-08-576 | 6 | HHCS, 5/16"-18UN 1" LONG |
| X20-28-509 | 6 | WASHER, LOCK, 5/16 " |
| P40-15-108 | 12 | TUBE, FRAME, L-4 SPACER |
| P40-15-104 | 3 | PUSH ROD, OB-KEV, L- SPACER, |
| 000P569223 | 3 | O-RING, NITRILE 90 DURO |
| P40-15-102 | 3 | RETAINER, PUSH ROD, ob - PIB NOSE |
| P40-40-614 | 12 | NUG, 1"-14 NF |
| P40-15- 144 | 3 | ADAPTER-PUSH ROD-OB PIECC NOJ 4.5" |
| X20-08-048 | 9 | HHCS,.312-18UNCX0.750" |
| P40-11-008 | 9 | WASHER, FLAT, 5/16", WI, PL |
| 000P569158 | 3 | O-RING, NITRILE 90 DURO |
| P40-15-113 | 3 | GLAND, WIPER, T / URETHANE, L-4 Thiab L-3 SPACER |
| P40-15-132 | 3 | SEAL ASSEMBLY, RAU PUB ROD 3.375 " |
| P40-15-109 | 3 | Ntiv nplhaib, RETAINING, 437 INT,.4378- SPEC |
| P40-15- 132 | 3 | SEAL ASSEMBLY, RAU PUB ROD 3.375 " |
| P40-15-107 | 3 | GLAND, WIPER, T / URETHANE, L-4 Thiab L-3 SPACER |
| TPH400 Fluid-Qhov kawg | ||
| Suction Valve Subassembly | ||
| SJS Part | Qty | Kev piav qhia |
| P40-40-200 | SUCTION VALVE SUBASSEMBLY | |
| P40-14-202 | 2 | PIN, COTTER, 1/8"X1 1/2", SPRING STEEL |
| P40-40-214 | 1 | Caij nplooj ntoos hlav, LOCK, NO.3 SUCTION STOP |
| P40-40-215 | 2 | BOOT, SUCTION STOP, NO.3, NO.4 & NO.5 VALVE |
| P40-40-216 | 1 | RETAINER, NTAUB NTAWV THIAB Caij nplooj ntoos hlav, NO.3 SUCTION VALVE |
| P40-40-112 | 2 | INSERT, RAU OB -Khoom BUSHING, NO.4 VALVE Phau ntawv qhia |
| P40-40-106 | 1 | Caij nplooj ntoos hlav, VALVE, 36LB / IN |
| P40-40-107 | 1 | VALVE, FRAC, 3 3/8" |
| P40-40-108 | 1 | INSERT, POLYURETHANE, NO.3 FRAC VALVE |
| P40-40-109 | 1 | SEAT, VALVE, TAPERED, NO.3 FRAC |
| 000P569240 | 1 | O-RING, NITRILE 90 DURO #240, PEROXIDE Kho tau |
| P40-40-111 | 1 | RETAINER, PIAV BUSHING, 3 3/8"X1/8" |
| SJS Part | Qty | Kev piav qhia |
| P40-44-200 | SUCTION VALVE SUBASSEMBLY, 4 1/2" | |
| B01-15-003 | 1 | PIN, COTTER, 5X35 GB91 |
| P40-44-213 | 1 | Caij nplooj ntoos hlav, LOCK, NO.4 SUCTION STOP |
| P40-40-215 | 2 | BOOT, SUCTION STOP, NO.3, NO.4 & NO.5 VALVE |
| P40-44-215 | 1 | RETAINER, NTAUB NTAWV THIAB Caij nplooj ntoos hlav, NO.4 SUCTION VALVE |
| P40-40-112 | 2 | INSERT, RAU OB -KOJ BUSHING, NO.4 VALVE GUIDE |
| P40-44-106 | 1 | Caij nplooj ntoos hlav, VALVE, 25LB / IN, STAINLESS, 4-IN.AND 4 1/2-IN |
| P40-44-107 | 1 | VALVE, FRAC NO.4 FRAC |
| P40-44-108 | 1 | INSERT, POLYURETHANE, NO.4 FRAC VALVE |
| P40-44-109 | 1 | SEAT, VALVE, TAPERED NO.4 FRAC |
| 000P569244 | 1 | O-RING, NITRILE 90 DURO #244, PEROXIDE Kho tau |
| P40-44-111 | 1 | RETAINER, GUIDE BUSHING, NO.4 |
| 6.1.2 Tshem Tawm Valve Subassembly | ||
| Ib feem | Qty | Kev piav qhia |
| P40-33-100 | DICHARGE VALVE SUBASSEMBLY, 3 3/8 " | |
| P40-40-706 | 1 | RETAINER, COVER, 3 3/8" |
| P40-33-102 | 1 | COV NTAUB NTAWV, TIV THAIV, TIV THAIV, NO.3 DOUBLE, GUIDED VALVE |
| P40-40-709 | 1 | Nplhaib, SPACER, NO.3 DICHARGE VALVE, |
| P40-40-708 | 1 | GASKET, NO.3 DISCHARGE VALVE, 3 3/8" |
| P40-40-112 | 2 | INSERT, RAU OB -KOJ BUSHING, NO.4 VALVE GUIDE |
| P40-40-106 | 1 | Caij nplooj ntoos hlav, VALVE, 36LB / IN |
| P40-40-107 | 1 | VALVE, FRAC, 3 3/8" |
| P40-40-108 | 1 | INSERT, POLYURETHANE, NO.3 FRAC VALVE |
| P40-40-109 | 1 | SEAT, VALVE, TAPERED, NO.3 FRAC |
| 000P569240 | 1 | O-RING, NITRILE 90 DURO #240, PEROXIDE CURED |
| P40-40-111 | 1 | RETAINER, PIAV BUSHING, 3 3/8"X1/8" |
| Ib feem | Qty | Kev piav qhia |
| P40-40-100 | DISCHARGE VALVE SUBASSEMBLY | |
| P40-40-101 | 1 | RETAINER, COVER, MACH, 4" FLUID-END ASSY |
| P40-40-102 | 1 | COV NTAUB NTAWV, QHOV TSEEM CEEB, NO.4 DOUBLE, GUIDED VALVE |
| P40-40-709 | 1 | RING, SPACER |
| P40-44-103 | 1 | GASKET |
| P40-40-112 | 2 | INSERT, RAU OB -KOJ BUSHING, NO.4 VALVE GUIDE |
| P40-40-106 | 1 | Caij nplooj ntoos hlav, VALVE, 36LB / IN |
| P40-40-107 | 1 | VALVE, FRAC, 3 3/8" |
| P40-40-108 | 1 | INSERT, POLYURETHANE |
| P40-40-109 | 1 | SEAT, VALVE, TAPERED, NO.3 FRAC |
| 000P569240 | 1 | O-RING, NITRILE 90 DURO #240, PEROXIDE CURED |
| P40-40-111 | 1 | RETAINER, PIAV BUSHING, 3 3/8"X1/8" |
| Ib feem | Qty | Kev piav qhia |
| P40-44- 100 | TSHUAJ VALVE SUBASSEMBLY, 4 1/2" |
|
| P40-40-101 | 1 | RETAINER, COVER, MACH, 4" FLUID-END ASSY |
| P40-40-102 | 1 | COV NTAUB NTAWV, QHOV TSEEM CEEB, NO.4 DOUBLE, GUIDED VALVE |
| P40-44-709 | 1 | Nplhaib, SPACER, NO.4 DISCHARGE VALVE, 4 1/2" |
| P40-40-103 | 1 | GASKET, NO.4 DISCHARGE VALVE, 4 1/2" |
| P40-40-112 | 2 | INSERT, RAU OB -KOJ BUSHING, NO.4 VALVE GUIDE |
| P40-44-106 | 1 | Caij nplooj ntoos hlav, VALVE, 25LB / IN, STAINLESS, 4- IN.AND 4 1/2-IN |
| P40-44-107 | 1 | VALVE, FRAC NO.4 FRAC |
| P40-44-108 | 1 | INSERT, POLYURETHANE, NO.4 FRAC VALVE |
| P40-44-109 | 1 | SEAT, VALVE, TAPERED NO.4 FRAC |
| 000P569244 | 1 | O-RING, NITRILE 90 DURO #244, PEROXIDE CURED |
| P40-44-111 | 1 | RETAINER, GUIDE BUSHING, NO.4 FRAC VALVE |
| Packing Subassembly | ||
| Ib feem | Qty | Kev piav qhia |
| P8T0009337 | PACKING, SPS, ASSY, 3.375, TPH400 | |
| P803370125 | 1 | PACKING, SPS, JUNK RING, 3.375X4.375X0.125 |
| P902503370 | 1 | PACKING, SPS, Lub taub hau Ntiv, 3.375X4.375 |
| P907503370 | 1 | PACKING, SPS, V4 RING, 3.375X4.375 |
| P904503370 | 1 | PACKING, SPS, poj niam ADAPTER, 3.375X4.375 |
| 000P569243 | 1 | O-RING, NITRILE 90 DURO #243, PEROXIDE CURED |
| P833371980 | 1 | PACKING, SPS, LANTERN RING, 3.375X4.375X1.981 |
| P905503370 | 1 | PACKING, SPS, WS SEAL, 3.375X3.875X0.413 |
| P8T0009400 | PACKING, ASSY, 4", TPH400 | |
| P804000125 | 1 | PACKING, SPS, JUNK RING, 4.000X5.000X0.125 |
| P902504000 | 1 | HEAD RING, 98.1X126.8X21.6 |
| P907504000 | 1 | VD RING, 100.8X127.8X10.2 |
| P904504000 | 1 | Poj niam ADAPTER, 101.6X126.9X12.3 |
| 000P569248 | 1 | O-RING, 119X3.55 |
| P834002360 | 1 | PACKING, SPS, LANTERN RING, 4.000X5.000X2.361 |
| P905504000 | 1 | OIL SEAL, 101.6X114.3X9.6 |
| P8T0009450 | PACKING, ASSY, 4.5", TPH400 | |
| P804500125 | 1 | PACKING, SPS, JUNK RING, 4.500X5.500X0.125 |
| P902504500 | 1 | HEAD RING, 110.8X139.5X21.6 |
| P907504500 | 1 | VD RING, 113.5X140.5X10.2 |
| P904504500 | 1 | FEMALE ADAPTER, 114.3X139.6X12.3 |
| 000P569252 | 1 | O-RING, 132X3.55 |
| P834502360 | 1 | PACKING, SPS, LANTERN RING, 4.500X5.500X2.361 |
| P905504500 | 1 | OIL SEAL, 112.8X128.2X9.6 |
| Packing Nut Subassembly | ||
| Ib feem | Qty | Kev piav qhia |
| P40-33-410 | WIPER GLAND SUBASSEMBLY, 3 3/8- IN |
|
| P40-33-411 | 1 | Txiv ntseej, PACKING ADJUSTMENT, 3 3/8" |
| P40-33-414 | 1 | Lub tes tsho, WIPER GLAND, 3 3/8-IN. |
| P40-40-415 | 1 | PIN, GROOVE, 1/2"X1 1/4" |
| P40-40-410 | WIPER GLAND SUBASSEMBLY, 4 " FLUID-END ASSY |
|
| P40-40-411 | 1 | NUJ, PACKING ADJUSTMENT, TRUE 4" |
| P40-40-414 | 1 | Sleeve, WIPER GLAND, 4 " |
| P40-40-415 | 1 | PIN, GROOVE, 1/2"X1 1/4" |
| P40-44-410 | WIPER GLAND SUBASSEMBLY, 4 1/2" | |
| P40-44-411 | 1 | Txiv ntseej, PACKING ADJUSTMENT, 4 1/2" |
| P40-40-414 | 1 | Sleeve, WIPER GLAND, 4 " |
| P40-40-415 | 1 | PIN, GROOVE, 1/2"X1 1/4" |
| Blank Discharge Flange Subassembly | ||
| Ib feem | Qty | Kev piav qhia |
| P40-33-600 | BLANK FLANGE, {{0}/8", TPH400 | |
| P40-33-711 | 1 | TSEEM CEEB, PASSAGE, 2 1/2" OD |
| P40-33-611 | 1 | LOJ FLANGE, DICHARGE, LEFT OUTLET, 3 3/8" -IN. |
| P40-40-614 | 2 | NUT, 1"-14NF, INTERNAL WREENCHING |
| P40-40-600 | FLANGE ASSEMBLY W/ob - PIB PACKING NUT |
|
| P40-40-612 | 1 | TSEEM CEEB, PASSAGE, 3 3/8 "OD |
| P40-40-611 | 1 | BLANK FLANGE |
| P40-40-614 | 2 | NUJ,, INTERNAL WRENCHING |
| Curved Discharge Flange Subassembly | ||
| Ib feem | Qty | Kev piav qhia |
| P40-33-620 | FLANGE ASSEMBLY, LEFT- tes, 3 3/8 " | |
| X05-91-537 | 1 | SEAL, RING, 2", FIG 2002, UNION |
| P40-33-626 | 1 | FLANGE, DICHARGE, 20000PSI WECO THOV, LEFT |
| P40-40-614 | 2 | NUT, 1"-14NF, INTERNAL WRENCHING |
| P40-44-627 | 2 | STUD, Tshem Tawm Flange, 6 " |
| P40-33-711 | 1 | SEAL, TXAUS SIAB, 2 1/2" OD |
| X05-91-537 | 1 | SEAL, RING, 2", FIG 2002, UNION |
| Ib feem | Qty | Kev piav qhia |
| P40-40-610 | RIGHT-HAND FLANGE ASSEMBLY | |
| F4P-10-229 | 1 | SEAL, RING, 2", FIG 1502,1002,602,402, UA |
| P40-40-626 | 1 | Flange, tso tawm, sab xis- tes, 3 " TXOJ CAI |
| P40-40-614 | 2 | NUJ, INTERNAL WRENCING |
| P40-40-612 | 1 | SEAL, PASSAGE, 3 3/8"OD |
| F4P-10-258 | 1 | SEAL, RING, 3" FIG 1502 UNION |
| Fluid-End Section Subassembly | ||
| Ib feem | Qty | Kev piav qhia |
| P40-33-700 | FLUID-QHOV SIAB, SUBASSEMBLY, 3 3/8" |
|
| P40-33-705 | 1 | BOLT, TOP-TIE, 30" LONG, 4340 ROLLED Xov |
| P40-40-704 | 2 | NUT, TOP-TIE-BOLT, RC30-24, W/TAPERED THOV |
| P40-44-715 | 1 | BOLT, BOTTOM TIE, CYLINDER |
| P40-44-714 | 2 | NUT, ELASTIC STOP, 3/4 "-16NF |
| P40-33-712 | 2 | SPACER.INNER DICHARGE PASSAGE, 3 3/8 "FLUID END |
| P40-33-711 | 4 | SEAL, TXAUS SIAB, 2 1/2" OD |
| V06-37-861 | 6 | PLUG, PIPE, 1/8", STD SQ |
| P40-33-710 | 3 | FLUID-QHIA QHOV TSEEB, MACHINED 3 3/8" |
| P40-40-709 | 3 | Nplhaib, SPACER, NO.3 DICHARGE VALVE, 3 3/8" |
| P40-40-708 | 3 | GASKET, NO.3 DISCHARGE VALVE, 3 3/8" |
| P40-40-707 | 3 | Npog, lub tog raj kheej taub hau, 3 3/8" |
| P40-40-706 | 3 | RETAINER, COVER, 3 3/8" |
| Ib feem | Qty | Kev piav qhia |
| P40-40-750 | FLUID-QHOV TSEEM CEEB SUBASSEMBLY | |
| P40-40-705 | 1 | BOLT, TOP-TIE, 3 DISCHARGE FLANGE, 6" |
| P40-40-719 | 2 | WASHER, HARDENED, 2.31 "ODX1.43"ID, F/TOP-TIE-BOLT |
| P40-40-704 | 2 | NUT, TOP-TIE-BOLT, RC30-24, W/TAPERED THOV |
| P40-40-714 | 2 | BOLT, TIE, HT-400,1 "DIA., RAU 3 TOP-TIE-BOLT |
| P40-40-712 | 2 | SPACER.INNER DICHARGE PASSAGE, 3 3/8 "OD |
| P40-40-612 | 4 | SEAL, PASSAGE, 3 3/8"OD |
| V06-37-861 | 6 | PLUG, PIPE, 1/8", STD SQ |
| P40-40-751 | 3 | FLUID-QHOV TSEEB, MACHINED 4" |
| P40-40-709 | 3 | RING, SPACER |
| P40-40-708 | 3 | GASKET |
| P40-40-707 | 3 | Npog, lub tog raj kheej taub hau, 3 3/8" |
| P40-40-706 | 3 | RETAINER, COVER, 3 3/8" |
| Ib feem | Qty | Kev piav qhia |
| P40-44-750 | FLUID END SUBASSEMBLY, 4 1/2" |
|
| P40-40-705 | 1 | BOLT, TOP-TIE, 3 DISCHARGE FLANGE, 6 " |
| P40-40-719 | 2 | WASHER, HARDENED, 2.31 "ODX1.43"ID, F/TOP-TIE-BOLT |
| P40-40-704 | 2 | NUT, TOP-TIE-BOLT, RC30- 24, W/TAPERED Xov |
| P40-44-715 | 1 | BOLT, BOTTOM TIE, CYLINDER |
| P40-44-714 | 2 | NUT, ELASTIC STOP, 3/4 "-16NF |
| P40-40-712 | 2 | SPACER.INNER DICHARGE PASSAGE, 3 3/8"OD |
| P40-40-612 | 4 | SEAL, PASSAGE, 3 3/8"OD |
| V06-37-861 | 6 | PLUG, PIPE, 1/8", STD SQ |
| P40-44-751 | 3 | FLUID-QHIA QHIA, MACHINED 4" & 4 1/2" |
| P40-44-709 | 3 | Ntiv nplhaib, SPACER, NO.4 DICHARGE VALVE, 4 1/2" |
| P40-40-103 | 3 | GASKET, NO.4 DISCHARGE VALVE, 4 1/2" |
| P40-44-707 | 3 | Npog, lub tog raj kheej taub hau, 4" THIAB 4 1/2" |
| P40-40- 101 | 3 | RETAINER, COVER, MACH, 4" FLUID-END ASSY |
| Cov cuab yeej twj tso kua mis | ||
| Ib feem | Qty | Kev piav qhia |
| P40-09-200 | TOOL ASSEMBLY, TPH400 3 3/8" | |
| P40-09-002 | 1 | TUAJ, PLUNGER ROV |
| P40-09-003 | 1 | TUAJ, PACKING INSERTING |
| P40-09-007 | 1 | INSERT INSTALLING TOOL |
| P40-09-009 | 1 | WREENCH, PACKING NUT ADJUSTING |
| P40-09-040 | 1 | TSEEM CEEB, NTAUB NTAWV THIAB TSEV KAWM NTAWV INSTALLATION |
| P40-09-064 | 1 | Txhawb nqa, Wrench TPH400 4", 3 3/8" |
| P40-09-044 | 1 | PUNCH, PIAV BUSHING tshem tawm, NO.3 THIAB NO.4 VALVE |
| P40-09-050 | 1 | PULLER ASSY., FOR VALVE SEAT, 4" 3 3/8" TPH400 |
| P40-09-059 | 1 | INSERTING TOOL, VALVE SEAT NO.4 (4", 4 1/2") |
| P40-09-060 | 1 | WREENCH , TIE-ROD |
| P40-09-058 | 1 | WREENCH, PLUNGER NOSE. |
| P40-09-056 | 1 | INSERTING TOOL, PLUNGER HNUB |
| P40-09-057 | 1 | INSERTING TOOL. TIE-ROD ib nrab |
| P40-09-061 | 1 | TORQUE Wrench, 200 ~ 1000 N * M, 3/4 " |
| P40-09-063 | 1 | HEX. L-KOJ. SIZE 1", LENGTH 9 11/32" |
| Ib feem | Qty | Kev piav qhia |
| P40-09- 100 | TOOL ASSEMBLY , 4 ". TPH400 | |
| P40-09-002 | 1 | TUAJ, PLUNGER ROV |
| P40-09-003 | 1 | TUAJ, PACKING INSERTING |
| P40-09-007 | 1 | INSERT INSTALLING TOOL |
| P40-09-009 | 1 | WREENCH, PACKING NUT ADJUSTING |
| P40-09-040 | 1 | TSEEM CEEB, NTAUB NTAWV THIAB TSEV KAWM NTAWV INSTALLATION |
| P40-09-064 | 1 | Txhawb nqa, Wrench TPH400 4", 3 3/8" |
| P40-09-044 | 1 | PUNCH, PIAV BUSHING tshem tawm, NO.3 THIAB NO.4 VALVE |
| P40-09-050 | 1 | PULLER ASSY., FOR VALVE SEAT, 4" 3 3/8" TPH400 |
| P40-09-059 | 1 | INSERTING TOOL, VALVE SEAT NO.4 (4", 4 1/2") |
| P40-09-060 | 1 | WREENCH , TIE-ROD |
| P40-09-058 | 1 | WREENCH, PLUNGER NOSE. |
| P40-09-056 | 1 | INSERTING TOOL, PLUNGER HNUB |
| P40-09-057 | 1 | INSERTING TOOL. TIE-ROD ib nrab |
| P40-09-061 | 1 | TORQUE Wrench, 200 ~ 1000 N * M, 3/4 " |
| P40-09-063 | 1 | HEX. L-KOJ. SIZE 1", LENGTH 9 11/32" |
| Ib feem | Qty | Kev piav qhia |
| P40-09-000 | TOOL ASSEMBLY, TPH400 4 1/2" | |
| P40-09-002 | 1 | TUAJ, PLUNGER ROV |
| P40-09-003 | 1 | TUAJ, PACKING INSERTING |
| P40-09-007 | 1 | INSERT INSTALLING TOOL |
| P40-09-009 | 1 | WREENCH, PACKING NUT ADJUSTING |
| P40-09-040 | 1 | TSEEM CEEB, NTAUB NTAWV THIAB TSEV KAWM NTAWV INSTALLATION |
| P40-09-043 | 1 | Txhawb nqa, Wrench TPH 400 4 1/2" |
| P40-09-044 | 1 | PUNCH, PIAV BUSHING tshem tawm, NO.3 THIAB NO.4 VALVE |
| P40-09-030 | 1 | PULLER ASSY., VALVE SEAT NO. 4 FRAC |
| P40-09-059 | 1 | INSERTING TOOL, VALVE SEAT NO.4 (4", 4 1/2") |
| P40-09-060 | 1 | WREENCH , TIE-ROD |
| P40-09-058 | 1 | WREENCH, PLUNGER NOSE. |
| P40-09-056 | 1 | INSERTING TOOL, PLUNGER HNUB |
| P40-09-057 | 1 | INSERTING TOOL. TIE-ROD ib nrab |
| P40-09-061 | 1 | TORQUE Wrench, 200 ~ 1000 N * M, 3/4 " |
| P40-09-063 | 1 | HEX. L-KOJ. SIZE 1", LENGTH 9 11/32" |
Cim npe nrov: tph400 plunger twj thiab accessories, Tuam Tshoj tph400 plunger twj thiab accessories manufacturers, lwm tus neeg, Hoobkas
